Make your car 4P Official

Our windshield banner custom | Vinyl Status is made from quality 1-piece vinyl and is curved to fit the contour of most upper windshields. These are perfect for the front or back of your vehicle and help keep the sun out of your eyes while on track.

How to install your windshield banner:

Before applying the material to your window you should measure the center point of the windshield and decide how low you’d like it to go. Some vehicles have small lines and arrows printed on the glass showing where window tint or banners should not exceed.

Once you have decided where to place the banner you will need to take one half of the logo and remove the paper backing. This will give you enough space to squeegee the logo and transfer tape. Once the material is fully secured on the window you will remove the other half of the banner and cut off the excess material.

How to Make Your Own Windshield Banner: A Step-by-Step DIY Guide

When you have both sides of the decal secured to the window and the white paper backing removed you will need to squeegee the material from the center out towards the bottom and top of the windshield. This will create a tight seal to the window.

After you have squeeged the material from the center out to the bottom and top of the windshield you will need to cut off the excess material. This will give you enough space to cut the banner to your desired height.